Il Router dispone di 4 porte Fast Ethernet (con autonegoziazione 10/100Mbps) per la connessione alla LAN e consente, grazie al modem ADSL2+ integrato, un downstream sino a 24Mbps. Dotato di funzionalità NAT permette a diversi utenti di navigare in Internet e condividere simultaneamente la connessione ADSL usando un solo abbonamento ed un singolo indirizzo IP.

L’interfaccia Wireless (IEEE802.11g a 54Mbps) ed il client USB permettono ad un utente di navigare e/o condividere files in piena libertà di movimento con la sicurezza del protocollo WPA/WPA2 in PSK.
Ulteriori utenti possono effettuare collegamenti wireless tramite altri client Atlantis Land NetFly A02-UP-W54, A02-UP1-W54 o A02-PCI-W54.

Il Wireless Router dispone di un sofisticato firewall integrato che include funzionalità avanzate di ispezione dei pacchetti.

Tramite la comoda interfaccia Web è possibile accedere velocemente e facilmente a tutte le funzioni offerte dal Router. Il dispositivo può essere configurato anche da remoto sia via Web che Telnet, indipendentemente dal tipo di abbonamento ADSL, grazie alla funzione Dynamic DNS integrata.

Plus di prodotto
• Accesso ADSL2+ ad Internet ad alta velocità
• IEEE802.11g Wireless AP (sino a 54Mbps) con supporto WEP/ WPA/WPA2
• Switch integrato con 4 porte10/100Mbps Fast Ethernet
• SOHO Firewall con SPI e Packet Filter
• Facile configurazione via Web, anche da remoto
• Client Wireless USB incluso

Scheda tecnica SchedaTecnica_A02-WS1

Garanzia 2 anni On Center Garanzia

Caratteristiche tecniche
Interfaces
WAN(ADSL2+): RJ11
LAN: 4 x RJ45 10/100 Base-T Ethernet ports (auto MDI/MDI-X)
Wireless: 1 X 2.2 dBi external orientable Antenna
9 diagnostic LEDs and Reset

Standards
ADSL
- Full Rate ANSI T1.413 issue 2
- ITU G.992.1 (G.dmt), ITU G.992.2 (G.lite), ITU G.994.1 (G.hs)
ADSL2
- ITU G.992.3 (G.dmt.bis) [12Mbps download, 1 Mbps upload]
ADSL2+
- ITU G.992.5 (G.dmt.bisplus) [24Mbps download, 1 Mbps upload]
ATM
- ATM Adaptation Layer Type 5(AAL5) and ATM service class : CBR, UBR, VBR-rt,
- VBR, ATM Forum UNI 3.0, 3.1 and 4.0

Wireless
Standard IEEE802.11g and IEEE802.11b
DSSS(Direct Sequence Spread Spectrum)
Modulation: QPSK / BPSK / CCK and OFDM
RF Frequency: 2.400 GHz ~2.4835GHz
Operating Channel: 13 (Europe)
Data Rate (with automatic adaptation): 802.11g (Up to 54Mbps) with Automatic Fall-Back
Coverage Area: [Outdoor <80m / Indoor <25m]
Wi-Fi Protected Access (WPA-PSK, WPA2-PSK) and WEP 64/128 bit

Protocols
RIP1, RIP2, STATIC ROUTING,IP, ICMP, TCP, UDP, IGMP
Payload encapsulation: RFC 2364 (PPPoA) , RFC 2516 (PPPoE) and RFC 1483 Routed and Bridge

Management
Easy Web GUI (also remote), Telnet (also remote)
Firmware upgrade from local (Web, Telnet)
SNMP MIB support

Firewall and Security
NAT, PAP, CHAP and Password protection for system management
SOHO Firewall Security with NTA Technology and Packet Filtering(up to 72 rules)
SPI Firewall
VPN (IPSec, PPTP) pass through

Support Internet Application
Web, FTP, ICQ, Telnet, E-Mail, News, Netmeeting, MS messanger, PCanywhere, mIRC, CuSeeme...

Advanced Characteristics
Multi-NAT
Wizard Setup
Dynamic DNS, UPnP, Virtual Server (port and protocol translation) and DMZ
DNS, DNS relay and IGMP proxy
DHCP server , DHCP client and DHCP relay

Physical and Environmental
Power Consumption: (12V ± 5%, 1A)
Dimensions / Weight: 175mm x 125mm x 39mm / 350g
Temperature Operating: [0°C to 40°C], Storage: [-20°C to 65°C], Humidity: 5-95% (without

condensing)

System requirements
Before installing the Adapter, your PC should meet the following:
- PC with available USB V2.0/1.1* slot
- Intel® Pentium®III 600Mhz or compatible processor with 128MB RAM
- Windows® 98SE/ME/2000/XP operating system
- Minimum 15 Mbytes free disk space for installing the driver and utilities
- CDRom drive

Package contents
Wireless ADSL2+ Router
Wireless USB Client
Vera (Multilanguage Interactive Tutorial)
CDRom with online manual (English, French and Italian) and Software
Quick Start Guide (English, French, Italian, Spanish and German)
RJ11 ADSL/telephone cable and CAT5 LAN cable
Power Adapter (AC-DC, 12V, 1A)